中文字幕人妻丝袜二区,护士张开腿被奷日出白浆,国产chinesehdxxxx,精品成在人线AV无码免费看

     
  中文版 English
 
Hot news:
  News
  Company news
  Industry News
  Current news
Hot Product
IPX1 IPX2 Drip Waterproof Test...
UL1439 Sharp Edge Tester
BND-TPK05 IEC 60529 Test Probe...
IEC62368 test probe kit BND-TP...
IEC 61032 Standard Test Probe ...
IEC60320 EN60320 Appliances co...
UL 498 Standard Plugs and Rece...
IPX1 to IPX4 Drip rain test an...
Vertical horizontal vibration ...
IP5X IP6X Sand and dust proof ...
climate constant temperature a...
IPX1 to IPX9 waterproof testin...
 
 
Industry News
Home  -  News  -  Industry News
Ingress Protection Requirements of Electrical Enclosures
From: BONAD  Date: 2024-01-11 15:55:14
IP Code testing is another name for IEC 60529 ingress protection testing. The main focus of the testing is how well an enclosure blocks liquids and solids. The IP Code consists of two digits together. The degree of protection from solid objects is indicated by the first number. Protection ratings, such as those for dust protection, may be included in this.

The second figure represents the level of liquid protection. Here is a chart that displays the IP Code rankings.


IP Rating

Size of Object Protected Against

Examples of Objects Protected Against

IP 0X

No protection

None

IP 1X

> 50 mm

Large surface of body, but not deliberate contact (back of hand vs finger)

IP 2X

> 12.5 mm

Smaller objects and fingers

IP 3X

> 2.5 mm

Thick wires or tools

IP 4X

> 1 mm

Screws, nails, wires

IP 5X

Dust protected

Some dust may enter, but cannot interfere with operation

IP 6X

Dust tight

No ingress of dust at all

The amount of ingress protection is specified in the NEMA 250 test standard. It also discusses the minimal specifications for enclosure design. Determining protection against solids and liquids is part of the electrical enclosure testing process, which pertains to the level of ingress protection.

Unlike IEC 60529, which provides an IP Code rating, NEMA 205 testing provides an enclosure rating. For national electrical manufacturers, this ranking is significant. It details the certification, testing, and NEMA type. The enclosure ratings and the corresponding protective needs are displayed in the chart below.


Type

Solid

Liquid

Type 1

Falling dirt

No protection

Type 2

Falling dirt

Dripping and light splashing water

Type 5

Falling dirt, settling airborne dust, fibers, flyings and lint

Dripping and light splashing water

Type 12

Falling dirt, circulating dust, fibers, flyings and lint

Dripping and light splashing water; seepage and light splashing of oil and non-corrosive coolants

Type 13

Falling dirt, circulating dust, fibers, flyings and lint

Dripping and light splashing water; seepage, light splashing and spraying of oil and non-corrosive coolants

Type 3

Windblown dust and falling dirt

Water from sleet, snow and windblown rain

Type 3R

Falling dirt

Water from falling rain, sleet and snow

Type 4

Windblown dust and falling dirt

Water directed from a hose or from rain, sleet, snow and splashing water

Type 4X

Windblown dust and falling dirt

Water directed from a hose or from rain, sleet, snow and splashing water; increased corrosion protection

Type 6

Falling dirt

Hose directed water and submersion that is temporary and at a limited depth

Type 6P

Falling dirt

Hose directed water and submersion that is prolonged and at a limited depth

Note that NEMA 250 Types 1, 2, 5, 12, and 13 are exclusively intended for indoor use. Every other variety is both indoors and outside. For marketing purposes, the NEMA electrical enclosure rating is frequently utilized. For many applications, cases with electrical enclosure certification and that pass the electrical enclosure water test are necessary.

Comparable to NEMA 250, UL 50 specifies protection levels and design requirements. In essence, it's an IP code for an electrical casing. The levels of protection from liquids and solids for each type of enclosure are listed in the chart below.

Type

Solid

Liquid

Type 1

Falling dirt

No protection

Type 2

Falling dirt

Dripping and light splashing of non-corrosive liquids

Type 5

Falling dirt, settling airborne dust, fibers, flyings and lint

Dripping and light splashing of non-corrosive liquids

Type 12

Falling dirt, circulating dust, fibers, flyings and lint

Dripping and light splashing non-corrosive liquids; seepage and light splashing of oil and non-corrosive coolants

Type 13

Falling dirt, circulating dust, fibers, flyings and lint

Dripping and light splashing non-corrosive liquids; seepage, light splashing and spraying of oil and non-corrosive coolants

Type 3

Windblown dust and falling dirt

Water from rain, sleet and snow

Type 3R

Falling dirt

Water from rain, sleet and snow

Type 4

Windblown dust and falling dirt

Water directed from a hose or from rain, sleet, snow and splashing water

Type 4X

Windblown dust and falling dirt

Water directed from a hose or from rain, sleet, snow and splashing water as well as corrosion protection

Type 6

Falling dirt

Hose directed water and occasional submersion that is temporary and at a limited depth

Type 6P

Falling dirt

Hose directed water and prolonged submersion at a limited depth

SHENZHEN BONAD INSTRUMENT CO.,LTD, is a high-tech company in China, BONAD quality system has been strictly certified by ISO9001:2015. As a CIE Membership.Our main products are Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, accessibility test probe and test finger, Glow Wire Test and Needle Flame Test,freezing load test package, soil moisture sensor, all kinds of gauges and so on.
BONAD have gathered lots of experienced researchers and administrators on this field. BONAD products are manufactured strictly in accordance with various EN, IEC, CE, UL, VDE, VS, JIS, ISO, CEE, BS, FMV, GB and other similar international standards. All products can pass CE certificate and authenticated by the third party lab.

Please feel free to contact us if you need any support.
sales Dep:Alice@szbonad.com,
Cell/WhatsApp:+8613380391156



 
 
Home  |  Products  |  News  |  About us  |  Feedback  |  Contact us  |  
Copyright © 2008-2015 Hong Kong Bonad Technology Limited | Shenzhen Bonad Instrument Co., LTD. All Rights Reserved.
 
    Add:C505, Hongdu Building,Bao\'an45 district,Shenzhen,518101,Guangdong Province,China    Tel:+86-13380391156    Fax:0755-23721200    Email:Alice@szbonad.com